Factory Supply Melamine Formaldehyde Resin Powder
Melamine Formaldehyde Resin Powder
Melamine resin is also called melamine formaldehyde resin. It is a polymer obtained by the reaction of melamine and formaldehyde. It is also called melamine formaldehyde resin. Melamine resin is added with inorganic filler to make molded products, such as decorative plates, tableware, daily necessities. The appearance of melamine tableware resembles porcelain or ivory, and it is not easy to crack and suitable for mechanical washing.
Physical Property:
Melamine moulding compound in powder form are based on melamine-formaldehyde resins fortified with high-class celluloses reinforcement and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants.
Advantages:
1. Low shrinkage, high hardness, strong tinting strength, and high bonding strength
2. High water resistance, can withstand boiling water for more than three hours
3. Thermal stability High, low temperature curing ability
4. Good insulation, acid resistance, alkali resistance, corrosion resistance
5. Slow heat transfer, good abrasion resistance, fast curing, no curing agent required
6. Good resistance to chemicals, electrical insulation properties, etc.
Melamine products have better hardness and wear resistance than urea ones.
Applications:
1.Kitchenware / dinnerware
2.Fine and heavy tableware
3.Electrical fittings and wiring devices
4.Kitchen utensil handles
5.Serving trays, buttons and Ashtrays
Certificates:
SGS Certificate No. SHAHG1810561301 Date: 04 Jun 2018
The testing result of submitted sample (White Melamine Plate)
Test Method: With reference to Commission Regulation (EU) No 10/2011 of 14 January 2011 Annex III and
Annex V for selection of condition and EN 1186-1:2002 for selection of test methods;
EN 1186-9: 2002 aqueous food simulants by article filling method;
EN 1186-14: 2002 substitute test;
| Simulant used | Time | Temperature | Max. Permissible Limit | Result of 001 Overall migration | Conclusion |
| 10% Ethanol (V/V) aqueous solution | 2.0hr(s) | 70℃ | 10mg/dm² | <3.0mg/dm² | PASS |
| 3% Acetic acid (W/V)aqueous solution | 2.0hr(s) | 70℃ | 10mg/dm² | <3.0mg/dm² | PASS |
| 95% Ethanol | 2.0hr(s) | 60℃ | 10mg/dm² | <3.0mg/dm² | PASS |
| Isooctane | 0.5hr(s) | 40℃ | 10mg/dm² | <3.0mg/dm² | PASS |
Factory Tour:
